IC-CHIPS.com - Trusted Obsoleto Distribuidor Componentes eletrônicos      Email: Sales@ic-chips.com 


Differential amps have 94dB minimum CMRR

  • Autor:Ella Cai
  • Lançamento em:2018-08-15
Analog Devices has released a set of differential-in differential-out amplifiers win a minimum CMRR (common-mode rejection ratio) of 94dB.

Based on the existing LTC6363 differential amplifier which needs external resistors, they have built-in matched resistors. “Resistor matching is equivalent to a 0.002%. Initial gain accuracy is 45ppm maximum and varies by only 0.5ppm/°C maximum over temperature,” said the firm.  “The precision resistors have been designed with overall system performance in mind, striking a balance between noise and linearity, and utilising laser trimmed factory calibration.”

The three parts are LTC6363-0.5, LTC6363-1 and LTC6363-2 with, respectively, fixed gains of 0.5, 1 and 2V/V. While the original LTC6363 was available in both 3 x 5mm MSOP and 2 x 3mm DFN packages, the new parts only come in MSOP.

Operation for the entire LTC6363 family is from supplies between 2.8V and 11V (±1.4V to ±5.5V) – while typically drawing 1.75mA – and from -40°C to 125°C.

Product design manager Maziar Tavakoli sees the amplifier’s balance of power consumption noise and linearity and precision meeting driving needs of high performance successive-approximation analogue to digital converters.

“For example, the LTC2378-20 20bit SAR ADC consumes 21mW at 1Msample/s,” he said. “The LTC6363 family’s noise and linearity have negligible impact on ADC performance while consuming a mere 19mW, comparable to the ADC’s power consumption.  Now with the LTC6363-0.5, LTC6363-1 and LTC6363-2 you can get this same ADC driving performance plus the added precision afforded by the precision integrated resistors.”

Driving 20bit ΣΔ ADCs is another use.

LTC6363-x.x series:

  • Differential rail-to-rail outputs 
  • Input common-mode range includes ground 
  • 0.5V/V, 1V/V, or 2V/V fixed gain 
  • 2.9nV/√Hz input-referred noise 
  • 45ppm max gain error 
  • 0.5ppm/°C max gain error drift 
  • 94dB min CMRR 
  • 100μV max input offset 
  • 50nA max input offset 
  • 720ns settling to 18bit (8Vp-p output) 
  • 118dB SFDR  (2kHz 18Vp-p) 
  • 500MHz gain.bandwidth 
  • 35MHz bandwidth (–3dB) 
  • 2.8V to 11V (±1.4V to ±5.5V) supply 
  • 2mA max supply 
  • 20μA shut-down (3V supply) 
  • 8-pin MSOP 


Your Trusted Partner for Distributing Electronic Components Chips!

IC-Chips.com incorporated in 2008. We strive to be a world leading independent distributor specialist offering integrated circuits, active, passive, connector, electromechanical, and discrete components. IC-Chips.com extensive articles line has made the company one of the Top independent distributor of choice for industrial, military, aerospace, and consumer electronics makers worldwide.

Our Mission is to provide the best quality parts with the best affordable price every time.

We have a vast inventory and solid backbone of suppliers of Power Transistors, Microchip, Infineon, Xilinx, Texas Instruments, Altera, Fairchild, NXP, Linear Tech, Vishay, and all others

We at IC-CHIPS.COM are committed to be your trusted consultant, your trust partners, your friend in the industry. We want your business to grow that is why we are here to assist.

Contact us:
Sales Dept .: sales@ic-chips.com
Purchasing Dept .: purchasing@ic-chips.com
Shipping Dept .: Shipping@ic-chips.com
Account Dept .: Account@ic-chips.com